Description
Water-repellent and penetrating oil primer.
Gjøco Oil Primer is a thixotropic primer for exterior wood. Contains film preservatives against mold. The paint is alkyd and oil-based, penetrates well into the wood and provides effective impregnation. Gjøco Oil Primer is ideal for priming pine and spruce timber outdoors. Can also be used on pressure-treated timber.
Product description
USAGE DATA
Application method: Brush. Should not be sprayed.
Thinner / cleaning agent: White spirit
Film thickness, wet: 80 micrometers
Film thickness, dry: 20 micrometers
Recommended consumption: 6-10 m²/liter, planed wood, 4-8 m²/liter, sawn timber.
Drying: (23°C, 50% relative humidity)
Dust dry: 5 hours. Low temperature extends drying time
Min. recoating interval: Minimum 24 hours. Low temperature extends drying time.
INSTRUCTIONS FOR USE
Pre-treatment: The surface must be clean and dry before painting work begins.
New wood: New untreated wood that has been exposed for more than 4 weeks should be wire-brushed before applying Gjøco Oil Primer. Grease and other dirt should be cleaned with Gjøco House Wash.
On planed wood: For sharp edges and other glossy surfaces, it may be necessary to sand down with a wire brush before priming.
Previously treated wood: Previously treated surfaces should be brushed clean of paint flakes and loose wood fibers with a wire brush/sanding.
Painting: Gjøco Oil Primer is ready to use and should not be thinned. New timber should be treated with Oil Primer as soon as possible after installation. Paint with a broad brush. Apply 1 coat to bare wood; on absorbent substrates, use as much primer as needed. Ensure that all end grain is sufficiently saturated (3-4 coats).
Other information:
Stir any surface oil back in for a while before use. Use clear Oil Primer under transparent glazes. It is recommended to perform a test application.
Waste management
Liquid paint should not be poured into drains or the environment but should be delivered to an approved hazardous waste collection facility.
Specifications
Technical data
Type: Alkyd- and oil-based primer
Color: Clear
Flash point: >62 °C
Density (kg/l): 0.89
Solids content (volume %): Approx. 42