Description
Special Wood Oil Additive. Anti-slip additive. Used on outdoor wood mixed into SAICOS Special Wood Oil. This additive further enhances slip resistance on surfaces such as steps, ramps, and pool surrounds. - All items within the SAICOS Special Wood Oil product group can be mixed and blended. - Higher slip resistance – R10 - Suitable for all color tones
Product description
Tips for areas of use: Steps, ramps, and pool surrounds. See more information about the 0240 additive on the product's technical data sheet. NOTE! Shelf life in a sealed container: 3 months. SAICOS Special Wood Oil mixed with the additive must be used immediately (within 24 hours) and it is important to stir the can thoroughly before use and at regular intervals throughout the work. Information: All items within the SAICOS Special Wood Oil product group can be mixed and blended. Appearance, product consumption, and final results depend on several factors such as the quality and age of the wood, and how the wood has been prepared through sanding and/or cleaning. We always recommend performing your own test on a smaller part of the actual wood surface before treating the entire surface. It is important to check product consumption and that the desired result is achieved. Always note which product has been used or which products have been mixed. Preparation: The raw wood may contain a maximum moisture content of 18% and the wood surface must be dry, clean, and frost-free. For best results, all previous surface treatments should be sanded away. On surfaces previously treated with SAICOS Special Wood Oil or other open-pored oil, it is generally sufficient to clean the surface thoroughly with SAICOS Wood Brightener before applying SAICOS Special Wood Oil. This also applies if the wood has turned heavily gray. See separate instructions for SAICOS Wood Brightener. Sanding must always be performed on painted and lacquered surfaces before applying SAICOS Special Wood Oil. Sanding should be done so that all paint and lacquer residues are removed. Never use finer sandpaper than P150. A newly sanded wood surface should be treated immediately because the wood is very sensitive to moisture, liquid spills, and dirt after sanding. Tips and advice: For softwoods sensitive to discoloration and blue stain, e.g., pine, Douglas fir, larch, and oak, a base treatment with SAICOS Wood Impregnation 9003 is recommended (which must soak into the wood for at least 18 hours before final treatment with SAICOS Special Wood Oil). Things to consider: No surface treatment of wood should take place in direct sunlight and/or during precipitation of hail, rain, or snow. Always plan so that you can quickly protect newly sanded wood and undried/uncured product from strong sunlight and moisture. Drying times are affected by temperature (Temp: 8 – 35 degrees C) and relative humidity (RH: 30 - 60%). Consumption 1L / 14 m2. Divided into 2 treatments with SAICOS Flat Brush 210mm / 150 mm, this provides a finished surface. NOTE! Consumption can be heavily affected by the age and quality of the raw wood and the preparations performed. New and un-impregnated wood should be treated on all sides with selected SAICOS products before assembly. Fresh and newly impregnated timber should generally be fully cured/dried for at least 6 months before any additional treatment is performed. Certain exotic woods require special measures before they can be treated. Always consult the retailer of the wood product. Always read labels and product information before use. Step-by-step instructions (read through all existing text in this technical data sheet before you begin). First application: Stir the can and pour a suitable amount into a SAICOS tray. Dampen the tip of the SAICOS Flat Brush and apply the product thinly and evenly along the grain of the wood. Drying time: at least 8 hours. Dust dry after approx. 4 hours. Second application: Repeat the treatment with SAICOS Special Wood Oil. Drying time: at least 8 hours. Dust dry after approx. 4 hours. This product can also be processed mechanically; further information can be obtained from your retailer. Simple maintenance: Cleaning: We advise against using a pressure washer. Easily remove troublesome green growth with SAICOS Green-Ex. Treat grayish surfaces with SAICOS Wood Brightener. Renovation: Clean the wood surface with SAICOS Wood Brightener according to the instructions. Apply the desired SAICOS Special Wood Oil. Use SAICOS Brush Cleaner for cleaning equipment and tools. All used tools, cloths, sanding dust, etc. must be handled as flammable - risk of spontaneous combustion.Specifications
Data sheet
Technical data sheet: Download