Description
You can find optional colors here
Gjøco Proff Uno is a low-odor, water-borne, pure acrylic paint for indoor use. It provides good coverage and a durable finish that is easy to keep clean. Perfect as a wall paint. Used on various types of construction boards, plaster, concrete, fiberglass wallpaper, previously painted surfaces, etc.
Color chart
Recommended coverage 8 - 10 m²/liter
Product description
Pre-treatment
- The surface must be clean and dry.
- Clean with Gjøco Interiørvask or Gjøco Husvask and rinse well with clean water.
- Previously painted surfaces, MDF, and hard, smooth surfaces should be sanded down and primed with Gjøco Proff Heft.
- Discolored surfaces should be primed with Gjøco Proff Isolèr to prevent bleed-through.
- Untreated masonry, absorbent surfaces, and previously whitewashed surfaces should be scraped, brushed, and cleaned before priming with Gjøco Primer for masonry and concrete.
Application
- Proff Uno is ready for use and should generally not be thinned.
- Apply 1–2 coats as needed.
- On absorbent surfaces, it may be necessary to apply several coats to avoid patchiness.
- It is recommended to use a roller with an extension pole to avoid lap marks.
- To achieve an even result, roll full lengths in the same direction across the entire wall.
Note
- Use the same batch number for the same coat and the same surface to avoid differences in gloss and color.
- If necessary, different batch numbers can be mixed before use.
- Color differences may occur if the bucket is tinted on different tinting machines and/or at different times. Be aware of this if more paint is needed for the same project later on.
Storage
- When storing leftover paint, close the lid tightly to prevent spills and drying.
- The paint should be transported, stored, and kept upright, in a dry place, and protected from frost.
Environmental labeling
- Gjøco Proff Uno is approved by the Nordic Ecolabel and meets the requirements for the Swan label.
- The product has been tested in accordance with the test requirements of BREEAM-NOR.
- The product fulfills BREEAM-NOR HEA 02.
- Gjøco Alle Rom does not contain any substances on the A20 list.
- Accepted according to the Byggvarubedömningen assessment criteria, BVB.
Waste management
- Liquid paint and washing water must not be poured into drains or into nature, but must be taken to an approved collection point for hazardous waste.
- Empty, clean, and dry plastic packaging without handles can be disposed of as plastic waste.
Other information
- Stir well before use.
- Package sizes: 2.7 L and 9 L, depending on the gloss level.
Specifications
Technical data
- Type: Pure acrylic paint
- Color: Base White, A, B, and C
- Gloss: Available in gloss 10
- Density: 1.3 g/l
- Solids content (volume %): Approx. 40%
Application method
- Brush, roller, or sprayer
- Spraying is only recommended for professionals
Thinning / Cleaning agent
- Water
Recommended coverage
- 8 - 10 m²/liter, depending on the surface
Indicative data for airless spray
- Nozzle: 0.021", 0.53 mm
- Spray angle: 65°-80°
- Spray pressure: 150 kg/cm²
Drying time (23 °C, 50 % R.H.)
- Dust-dry: 1 hour
- Recoating interval, minimum: 4 hours (Varies with changes in temperature, humidity, ventilation, and film thickness. Full adhesion is achieved after 4 weeks of curing.)
Minimum application temperature
- +5°C (Best results are achieved when applied at room temperature)
Datasheets