Description
You can find optional colors here
Gjøco Proff Uno is a low-odor, water-dilutable, pure acrylic paint for indoor use. Covers well and provides a durable surface that is easy to keep clean. Perfect as wall paint. Used on various types of construction boards, plaster, concrete, fiberglass wallpaper, previously painted surfaces, etc.
Color chart
Recommended coverage 8 - 10 m²/liter
Product description
Pre-treatment
- The substrate must be clean and dry.
- Clean with Gjøco Interiørvask or Gjøco Husvask and rinse well with clean water.
- Previously painted surfaces, MDF, and hard, smooth surfaces should be sanded down and primed with Gjøco Proff Heft.
- Discolored surfaces should be primed with Gjøco Proff Isolèr to prevent bleed-through.
- Untreated masonry, absorbent surfaces, and previously limewashed surfaces should be scraped, brushed, and washed before priming with Gjøco Primer for masonry and concrete.
Application
- Proff Uno is ready for use and should normally not be thinned.
- Apply 1–2 coats as needed.
- On absorbent substrates, it may be necessary to apply several coats to avoid patchy results.
- It is recommended to use a roller with an extension pole to avoid lap marks.
- To achieve an even result, roll full lengths in the same direction across the entire wall.
Note
- Use the same production number for the same coat and surface to avoid gloss and color differences.
- If necessary, different production numbers can be mixed before use.
- Color variations may occur if the bucket is tinted on different tinting machines and/or at different times. Be aware of this if more paint is needed for the same project later on.
Storage
- When storing leftover paint, put the lid on tightly to prevent spills and drying.
- The paint must be transported, stored, and kept upright, in a dry and frost-free place.
Environmental labeling
- Gjøco Proff Uno is approved by the Nordic Swan Ecolabel and meets the criteria for the Swan label.
- The product has been tested in accordance with the test requirements of BREEAM-NOR.
- The product meets BREEAM-NOR HEA 02.
- Gjøco Alle Rom does not contain any substances on the A20 list.
- Accepted according to the Construction Product Assessment (Byggvarubedömningen), BVB.
Waste management
- Liquid paint and wash water must not be poured into the drain or into nature, but must be taken to an approved collection point for hazardous waste.
- Empty, clean, and dry plastic packaging without handles can be disposed of as plastic waste.
Other information
- Stir well before use.
- Packaging sizes: 2.7 L and 9 L, depending on the gloss level.
Specifications
Technical data
- Type: Pure acrylic paint
- Color: Base White, A, B, and C
- Gloss: Supplied in gloss 5
- Density: 1.3 g/l
- Solids content (volume %): Approx. 40%
Application method
- Brush, roller, or spray
- Spraying is recommended for professionals only
Thinning / Cleaning agent
- Water
Recommended coverage
- 8 - 10 m²/liter, depending on the substrate
Indicative data for high-pressure spray
- Nozzle: 0.021", 0.53 mm
- Spray angle: 65°-80°
- Spray pressure: 150 kg/cm²
Drying time (23 °C, 50 % R.H.)
- Touch dry: 1 hour
- Recoating interval, minimum: 4 hours (Varies with changing temperatures, humidity, ventilation, and film thickness. Full adhesion is achieved after 4 weeks of curing.)
Minimum application temperature
- +5°C (Best results are achieved when applied at room temperature)
Data sheets