Description
You can find ready-mixed colors here
Gjøco Proff Solid is a water-borne, low-odor, and solvent-free PVA dispersion paint for indoor use in dry areas. Gjøco Proff Solid is used as an intermediate and top coat on various types of building boards, plaster, concrete, fiberglass wallpaper, previously painted surfaces, etc.
Recommended coverage: 8 - 10 m²/liter
- PVA dispersion paint
- For indoor use in dry areas
- Used as an intermediate and top coat
- Low-odor
Color chart
Product description
Pre-treatment
The surface must be clean and dry. Clean with Gjøco Interiørvask or Gjøco Husvask and rinse well with clean water. Previously painted surfaces, MDF, and hard, smooth surfaces should be matted down with sandpaper and primed with Gjøco Proff Heft. Discolored surfaces should be primed with Gjøco Proff Isolèr to prevent bleed-through. Untreated masonry, absorbent surfaces, and previously limewashed surfaces should be scraped, brushed, and washed before priming with Gjøco Primer for masonry and concrete.
Application
Proff Solid is ready for use and should normally not be thinned. Apply 1–2 coats as needed. It is recommended to use a roller with an extension pole, as it is easier to avoid roller marks. To achieve an even result, it is recommended to roll full lengths in the same direction over the entire wall.
Note
Use the same production number on the same layer and the same surface to avoid gloss and color differences. If necessary, different production numbers can be mixed before use. Shade differences may occur if the bucket is tinted on different tinting machines and/or at different times. Please be aware of this if more paint is needed for the same project later on.
Storage
When storing leftover paint, close the lid tightly to prevent spills and drying out. The paint must be transported, stored, and kept upright, in a dry place, and protected from frost.
Environmental labeling
Gjøco Proff Solid is approved by the Nordic Swan Ecolabel and meets the requirements for the Swan environmental label. Accepted according to the Byggvarubedömningen (BVB) assessment criteria.
Waste management
Liquid paint and wash water must not be emptied into the drain or the environment, but must be taken to an approved collection point for hazardous waste. Empty, clean, and dry plastic packaging without handles can be disposed of as plastic waste.
Specifications
Type: PVA dispersion paint
Color: Base White, A, B, and C
Gloss: Supplied in gloss 5
Weight per liter: Approx. 1.4 g/l
Solids content (volume %): Approx. 40
Application method: Brush, roller, or spray. Spraying is recommended for professionals only.
Thinner/cleaning agent: Water
Recommended coverage: 8 - 10 m²/liter, depending on the surface
Guideline data for airless spray:
Nozzle: 0.53 mm , 0.021"
Spray angle: 65°-80°
Spray pressure: 150 kg/cm²
Drying time (23 °C, 50 % R.H.):
Touch dry: 1 hour
Recoat interval, minimum: 3 hours.
Data sheets