Description
You can find your choice of color here
Gjøco Proff Solid is a water-borne, low-odor and solvent-free PVA dispersion paint for indoor use in dry areas. Gjøco Proff Solid is used as an intermediate and topcoat on various types of construction boards, plaster, concrete, fiberglass wallpaper, previously painted surfaces, etc.
Recommended coverage: 8 - 10 m²/liter
- PVA dispersion paint
- For indoor use in dry areas
- Used as an intermediate and topcoat
- Low odor
Color chart
Product description
Pretreatment
The substrate must be clean and dry. Clean with Gjøco Interiørvask or Gjøco Husvask and rinse well with clean water. Previously painted surfaces, MDF, and hard, smooth surfaces should be matted down with sandpaper and primed with Gjøco Proff Heft. Discolored surfaces should be primed with Gjøco Proff Isolèr to prevent bleed-through. Untreated masonry, absorbent surfaces, and previously limewashed surfaces should be scraped, brushed, and washed before priming with Gjøco Primer for masonry and concrete.
Application
Proff Solid is ready for use and should normally not be thinned. Apply 1–2 coats as needed. We recommend using a roller with an extension pole, as it is easier to avoid overlapping marks. To achieve an even result, it is recommended to roll entire lengths in the same direction across the whole wall.
Note
Use the same production number for the same coat and the same surface to avoid gloss and color differences. If necessary, different production numbers can be mixed before use. Shade differences may occur if the bucket is tinted on different tinting machines and/or at different times. Be aware of this if more paint is needed for the same project later on.
Storage
When storing leftover paint, close the lid tightly to prevent spills and drying out. The paint should be transported, stored, and kept upright, dry, and frost-free.
Eco-labeling
Gjøco Proff Solid is approved by the Nordic Swan Ecolabel and meets the requirements for the Swan label. Accepted according to the Byggvarubedömningen assessment criteria (BVB).
Waste management
Liquid paint and wash water must not be poured into the drain or into nature, but must be taken to an approved collection point for hazardous waste. Empty, clean, and dry plastic packaging without handles can be disposed of as plastic waste.
Specifications
Type: PVA dispersion paint
Color: Base White, A, B and C
Gloss: Delivered in gloss 5
Density: Approx. 1.4 g/l
Dry content (volume %): Approx. 40
Application method: Brush, roller or sprayer. Spraying is recommended for professionals only.
Thinning/cleaning agent: Water
Recommended coverage: 8 - 10 m²/liter, depending on the substrate
Guideline data for airless sprayer:
Nozzle: 0.53 mm , 0.021"
Spray angle: 65°-80°
Spray pressure: 150 kg/cm²
Drying time (23 °C, 50 % R.H.):
Dust dry: 1 hour
Recoating interval, minimum: 3 hours.
Data sheets