Description
Gray medium-grade all-purpose filler.
Proff Lättspackel Medium is a high-quality lightweight filler for all common surfaces on interior walls and ceilings in dry rooms. The product is easy to apply and sand, and has very good filling properties. It is suitable for both spot filling and wide skimming of plaster, concrete, aerated concrete, and previously painted surfaces in both renovations and new construction. Suitable for use under wallpaper.
- Ready-mixed, gray, easy-to-work-with all-purpose filler.
- Good filling capacity.
- Smooth consistency that facilitates work.
- Suitable for spot filling, joint filling, and wide skimming.
- For both new construction and renovation.
Product description
-
Pre-treatment
Surfaces must be clean, dry, and structurally sound. Glossy, painted surfaces should be cleaned with Gjøco Husvask or Gjøco Interiørvask and sanded matt. Irregularities are removed by sanding. For filling new plasterboard, Proff Lättspackel Fin and paper tape should be used. Apply the paper tape onto wet filler and press in well with a wide putty knife. Then, apply Proff Lättspackel Fin once more. Remove excess filler.
Application
Proff Lättsparkel Medium is applied with a steel putty knife, trowel, or machine. It is important that the filler is thoroughly dry between each application. Recommended consumption: Depending on the surface, approx. 1 m²/liter at 1 mm thickness. Working temperature: The surface must be above +10°C during application. Sanding is done with fine sandpaper (100–120 grit). Filled surfaces should be primed before wallpapering.
Storage
When storing leftover filler, close the lid tightly to prevent spillage and drying. The filler must be transported, stored, and kept upright, dry, and frost-free.
Waste management
Filler and wash water must not be disposed of in drains or in nature but should be delivered to a recycling center. Empty, clean, and dry plastic packaging without handles can be disposed of as plastic waste.
Other information
Store in a dry, frost-free place and protect from sunlight. Unopened packaging can be stored for 12 months.
It may still be usable after 12 months; check consistency and smell.
Specifications
Technical data
| Property | Value |
|---|---|
| Type | Latex polymer with lightweight fillers and dolomite |
| Color | Gray |
| Density | Approx. 1.3 kg/l |
| pH | Approx. 9 |
| Grain size | Max 0.2 mm |
| Solids content (volume) | Approx. 58% |
| Application method | Steel putty knife, trowel, or machine |
| Thinner / cleaning | Water (should not normally be thinned) |
| Material consumption | 1 liter/m² at 1 mm layer thickness |
| Drying time (general) | Depends on surface, layer thickness, temperature, and humidity |
| Touch dry | Approx. 0.5 hours |
| Recoating interval | At least 24 hours |
| Recommended max layer thickness | Max 3 mm |
| Min. application temperature | +5°C |
| Shelf life | 1 year in unopened packaging |