Description
Semi-gloss and durable floor paint.
Golv 40 vattenspädbar is a water-borne floor coating based on polyurethane-modified alkyd. The paint has good application properties, good flow, and is highly durable. Used for indoor wooden floors and old concrete floors. Can also be used outdoors on old concrete floors. Do not use on new concrete or surfaces with a risk of moisture.
- Durable floor paint in a semi-gloss finish
- Provides a smooth and nice surface
- Suitable for woodwork, laminate, parquet, and concrete
- Also suitable for tiles
Color chart
Product description
Pre-treatment
Wood/hardwood/laminate:
The surface must be clean, dry, and free from grease.
- Previously painted surfaces should be washed with Gjøco Hustvätt and rinsed with water.
- Old glossy and semi-gloss paint should be matted down with sandpaper.
- Untreated, sanded down, or worn-out wooden floors should first be treated with Gjøco Spärrgrund (see separate recommendations for this product). Thereafter, the floor is treated with 2-3 coats of Golv 40 vattenspädbar.
- Old laminate flooring does not require a primer.
- New laminate flooring may contain substances that make painting difficult. A test application is recommended.
Concrete:
Golv 40 vattenspädbar is suitable as paint for older untreated concrete floors and previously painted concrete floors. The surface must be clean, dry, and free from grease and oil stains.
- On previously painted surfaces, all loose paint must be removed and then cleaned with Gjøco Hustvätt.
- Old glossy or semi-gloss paint should be matted down with sandpaper. Vacuum and wipe with a lint-free cloth, preferably microfiber. It is important to remove all sanding dust and similar debris to achieve good adhesion.
- Old untreated concrete floors should be sanded before painting.
- For newly cast floors, warehouse floors, garages, and other floors with high loads, Gjøco Poxydekk is recommended.
Application method
Golv 40 vattenspädbar is ready for use and must not be thinned. Stir well and apply 2-3 coats depending on the substrate. Apply evenly and generously.
Other information
Store in a dry, frost-free place. Stir well before use. Different batch numbers should be mixed to avoid differences in gloss and color.
Wait at least 1 week before washing the floor; the paint needs up to 4 weeks for complete curing.
Specifications
Type: Water-borne oil paint based on polyurethane binder
Gloss: Semi-gloss
Density (kg/l): Approx. 1.2
Solids content (volume %): 38-40
pH: 8-9
APPLICATION DATA
Application method: Wide brush, roller. Spraying is only recommended for professional users.
Thinning / cleaning agent: Water
Data for airless spray:
Nozzle: 0.021 ", 0.53 mm
Spray angle: 65-80°
Paint pressure: 150 kg/cm²
Recommended coverage: 6-8 m²/liter
Drying (23°C, 50% relative humidity)
Dust dry: 2 hours
Recoatable, at least: Min. 8 hours.
Full adhesion is achieved after 4 weeks of curing.
Varies with changing temperatures, humidity, ventilation, and layer thickness
Minimum application temp. ºC: +10°C. Best results are obtained by applying at room temperature