Gjøco Enamel Paint 90 Ready-mixed colors White & Black - Glossy oil-based paint for many types of surfaces.

INSTRUCTIONS FOR USE

Pre-treatment

The surface must be free from grease, oil, and other contaminants before sandblasting to SA 2 ½. Clean with Gjøco Krafttvätt. If sandblasting is to be carried out, all old loose paint, loose rust, and oil must be removed and brushed away to ST 2. Steel is primed with Gjøco Antirustprimer. Aluminum, zinc, and sandblasted/galvanized steel are primed with Gjøco Epoxiprimer EP50.

Application

Stir the paint well before use. We recommend using mechanical stirring. Thinning is generally not recommended. If thinning is necessary, use white spirit.

Other information

The product must be stored in accordance with national regulations. Containers must be kept tightly closed and stored in a dry, stable temperature.

Safety

See separate safety data sheet. VOC limit (cat. A/i): 500 g/l (2010). The product contains <450 g/l VOC

PHYSICAL DATA

Type: Alkyd oil-based paint

Color: Various

Gloss: Glossy

Flash point: 39°C

Density (kg/l): 1.1

Solids content (vol %): Approx. 54

APPLICATION DATA

Application method: Brush, roller, or spray

Thinner / cleaning agent: White spirit

Film thickness, wet: 90 micrometers

Film thickness, dry: 40 micrometers

Data for high-pressure spray:

10 to 12 m2 per liter, depending on the surface

Nozzle:

Spray angle: 0015-0021 "

Paint pressure: 65-80°

Recommended consumption: 150 kg / cm2

Drying time (23 °C, 50% R.H.):

Dust dry: Approximately 5 hours

Overcoating interval, minimum: 24 hours

Fully cured: 7 days