Description
The Calmarberedar´n PREMIUM is an enamelled water heater that includes a mounted constant anode.
The water heater with dual heating elements!
The Calmar Beredar´n is equipped with dual heating elements. If one breaks, the heater still functions on one element, which is useful until the broken one is replaced.
With the built-in titanium anode, there is no need for anode replacement. The heater is supplied for wall mounting, but a floor stand is available as an accessory. Heating element 2000W-230V plug.
Product description
- Unique "duo-function," which means they are equipped with dual heating elements.
- Indirect heating, which means the heating elements are protected and not in direct contact with the water.
- Digital control with a programmable thermostat for features such as weekly scheduling, which saves energy when the heater is not in use.
- Wall bracket. A stand for floor mounting is available as an accessory.
Constant anode is included as standard.
The Premium series is equipped with a constant anode. The function of the anode is to protect the vessel against rust. Normally, a heater contains a magnesium anode that should be replaced every two years. With a constant titanium anode, you get the same protection without the need for replacement.
How it works
The titanium anode is controlled by an anode booster that senses the need and adjusts its protection.
Heaters with a constant anode are recommended for water with low conductivity, a conductivity value below 25 mS/m, or in the case of brackish water or private wells.
The indicator light shows the anode's function.
On the side of the heater's control box, there is an indicator light that shows that the titanium anode is active.
What size heater do I need?
A normal shower uses between 40-50 liters of mixed water; a modern shower mixer provides approximately 12 liters per minute, and a normal shower takes 3-4 minutes. If you have teenagers, a whirlpool tub, or similar, you must take that into account in your calculation. Therefore, always think twice before choosing a size. The operating cost of choosing a larger model is negligible.
Choosing the size of the heater:
Calculating how large a heater I need is quite simple. A heater provides approximately 1.5 times its own volume in mixed water. So, if you choose, for example, a 100-liter heater, it will provide approximately 150 liters of mixed water (150/50 = 3 consecutive showers).
Installation:
The Calmar Beredar´n is connected with the included plug to a grounded 230V outlet (NOTE: the cord must not be cut). The fuse must be at least 10 A, and there must be no other load on the phase. The heater must be installed in a frost-free area, and the floor must be equipped with a floor drain. The heater has an IPX4 protection rating.
Service/maintenance:
All sizes in the Premium series are equipped with a constant anode, whose task is to protect the enamel against rust. This anode does not need to be replaced over time.
Specifications
Series: Premium
Color: White
Material: Steel sheet/plastic
Corrosion protection: Enamelled, including titanium anode.
Connection: Plug
Energy efficiency: C-class
Energy consumption: 1429(kW/year)
Declared load profile: L
Indirect heating: Yes
Heating time to 50°C: Approx. 135 min
Temperature (°C): 15-80°C
Power: 2 x 1,000W
Voltage: 230V
IP-Rating: IPX4
Connection dimension: 15mm Ø
Volume: 140L
Weight: 59kg
Depth: 470mm
Width: 454mm
Height: 1450mm
Data sheet
Link