Description
Nordsjö Professional Wet Room Filler is a high-filling, lightweight filler for filling, jointing, and skim coating on plaster, concrete, lightweight concrete, and plasterboard, as well as for embedding joint tape.
Nordsjö Professional Wet Room Filler is primarily used in wet areas or where a water-resistant filler is required. Nordsjö Professional Wet Room Filler is part of Nordsjö's Wet Room System, approved according to the painting industry's standard for wet rooms (see separate brochure).
The product meets the requirements specified in HusAMA 21 regarding fillers for wet rooms. For skim coating, a total layer thickness of max 3 mm is recommended. The filling capacity for individual holes and unevenness is higher, up to 5 mm.
Product description
The surface must be firm, clean, and dry. Nordsjö Professional Wet Room is intended for manual filling. When sanding, eye protection and a dust mask are recommended.
Store frost-free. Do not fill when the surface temperature is below +5 ºC.
Specifications
Area of use: Indoors
Binder type: Copolymer latex
Grain size: Max 0.16 mm
Density: 1.10
Drying time 23°C 50%
RH: 4 hours depending on layer thickness
Wet scrub resistance (method-modified SS184164): Over 2000 cycles
Air/Object temp: Min +5°C
Air humidity RH: 40-80% RH (65% RH optimal)
Thinning: Water
Tools: Hand filling, spraying after dilution with approx. 3% water.
Sandability: Easy to sand
Color: Bluish-tinted
Packaging: 250 grams, 2.5 Liters and 10 Liters
Cleaning: Soap and water
Storage: Frost-free