Description
Non-reflective ceiling paint, easy to apply, easy to touch up.
Gjøco Proff Tak och Loft is a water-thinnable, low-odor, solvent-free, and non-reflective PVA dispersion paint for indoor use in dry areas. Used as a primer and topcoat on ceilings made of building boards, plaster, concrete, fiberglass wallpaper, and filler.
- Non-reflective PVA dispersion paint
- Provides matte and streak-free ceilings
- Good coverage
- Low splatter
- Low odor
Product description
Pre-treatment
The surface must be solid, clean, and dry. Clean with Gjøco Hustvätt or Biokleen Målartvätt, and rinse well with clean water. Smooth surfaces should be matted down with sandpaper. Discolored surfaces should be primed with Gjøco Proff Isolèr to prevent staining. Untreated masonry, previously whitewashed, and heavily contaminated surfaces must be scraped, brushed, and primed with Gjøco Primer for masonry and concrete before applying Gjøco Proff Tak og Loft.
Application
Gjøco Proff Tak och Loft is ready for use and should normally not be thinned. Apply 1–2 coats as needed. On absorbent surfaces, it may be necessary to apply several coats to avoid spots. Eco-labeling Gjøco Proff Tak och Loft is approved by the Nordic Ecolabel and meets the requirements for the Swan label. Accepted according to the Building Materials Assessment (Byggvarubedömningen, BVB) criteria. Storage When storing leftover paint, replace the lid securely to prevent spills and drying. The paint must be transported, stored, and kept upright, in a dry and frost-free place. Waste management Liquid paint and wash water must not be disposed of in drains or in nature but delivered to an approved collection point for hazardous waste. Empty, clean, and dry plastic packaging without handles can be delivered as plastic waste. Other information Stir well before use.
AREA OF USE
Substrate:
The surface should be clean and dry.
Application method:
Brush or roller.
Thinning:
Water.
Storage:
Store in a dry, frost-free place, out of reach of children.
Transport:
Not classified as dangerous goods according to current regulations.
Indoor environment / emissions:
The product has low emissions.
Specifications
Type: PVA dispersion paint
Color: White, can be tinted into light colors
Gloss: Matte 1–3
Density: Approx. 1.4 g/l
Dry content (volume %): Approx. 40
Application method: Brush, roller, or high-pressure sprayer. Spraying should be performed by professionals
Thinning/cleaning agent: Water
Recommended coverage: 8 - 10 m²/liter, depending on the surface
Indicative data for high-pressure sprayer:
Nozzle: 0.021", 0.53 mm
Spray angle: 65–80⁰
Spray pressure: 150 kg/cm2
Drying time (23 °C, 50% R.H.):
Dust-dry: 1 hour
Overcoating interval, minimum: 2 hours. Varies with changes in temperature, humidity, ventilation, and film thickness. Full adhesion is achieved after 4 weeks of curing.
Minimum application temperature: +5°C. Best results are obtained when applied at room temperature.