INSTRUCTIONS FOR USE
Pre-treatment
The surface must be solid, clean, and dry. Remove rust, loose paint, oil, dirt, and similar substances. All visible rusted surfaces must be thoroughly wire-brushed to bare metal. Old paint that is firmly attached does not need to be removed. All surfaces should be cleaned well with Gjöco Kraftvask and rinsed thoroughly with clean water.
Application
Apply evenly and generously. Work quickly and avoid going back over semi-dry paint. On surfaces where a smooth and even finish is required, smoothing with a brush is recommended. Should be top-coated with a suitable finishing paint, e.g., Gjöco Enamel Paint, Herregård Maximal, or Herregård Supermax for outdoor use, or e.g., Gjöco Fashion for indoor use.
Storage
Reseal the lid well during storage to avoid spills and drying out. The product must be transported and stored in a dry, frost-free place.
Waste Management
Liquid paint should not be poured into the drain or the environment, but delivered to an authorized recycling center.
OTHER INFORMATION
The surface must be solid, clean, and dry before applying the product. The application temperature for air and surface should be at least +10°C. Stir well before use. Reseal the lid well during storage to avoid spills and drying out. For more detailed information, see the safety and technical data sheets. Packaging size: 0.75 and 3 liters