INSTRUCTIONS FOR USE
Preparation
The surface must be clean and dry. Previously painted surfaces should be washed with Gjøco Interior Cleaner and rinsed with water. Old glossy and semi-gloss paint layers should be matted down with sandpaper. Untreated panel: Prime with at least 2 coats of Gjøco Barrier Primer.
Previously painted surfaces: Prime with one coat of Gjøco Barrier Primer. Surfaces previously painted with alkyd paint should always be primed before applying Gjøco Superfinish 15. Usage: Gjøco Superfinish 15 is ready for use and should not be thinned.
Apply generously and evenly with suitable painting tools. On absorbent and porous surfaces, 3 coats are recommended to avoid patchiness. To achieve satisfactory leveling, avoid going back to touch up semi-dry paint.
Other information
The application temperature of the environment and the substrate must be at least +10°C. Painted surfaces must cure for at least 4 weeks before cleaning with a mild detergent. Stir well before use. Different production numbers should be mixed before use. Close the lid tightly to store paint and prevent spills and drying out.
Liquid paint must not be poured into the drain but delivered to a recycling center. Store in a dry and frost-free place.
Safety
See separate safety data sheet. EU limit value for the product (cat A/d.): 130 g/l (2010). This product contains: <75 g/l VOC. Eco-label: Gjøco Superfinish 15 is approved by Eco-label Norway and meets the requirements for the Nordic Swan Ecolabel and the EU Ecolabel. * Suitable for indoor use * Limited content of hazardous substances * Low solvent content. More information is available at http://ec.europa.eu/ecolabel
Waste management
Liquid paint should not be poured into drains or waterways, but delivered to a recycling station.